File: AliExpress Promo Codes Ch(...).png (1.7 MB, 1920x3365)

1.7 MB PNG

Codes for the month

>AliExpress October 2026 Monthly Codes
$3 off 29: IFP0RZCO + IFPUG5P8
$6 off 59: IFPS3OKK + IFPURKCO
$9 off 89: IFPJLK5R + IFPWNU2D
$16 off 149: IFPSJQFD + IFPNPY9Q
$23 off 199: IFP13RPU + IFPIITKP
$30 off 269: IFPRF9AI + IFPNOCEM
$40 off 369: IFPXLGVD + IFPWG4JZ
$50 off 469: IFPFUHDE + IFP4LLOT
$60 off 599: IFPDNAXV + IFPBWIIH
$70 off 699: IFPSZID1 + IFPXSUPS

>AliExpress USA October 2026 Codes
$2 off 15: IFPWFQMA + IFPDYH4Z
$5 off 35: IFPHYSHA + IFPU66HE
$9 off 65: IFPOGZJN + IFPNHQWZ
$14 off 99: IFPTVEZD + IFPS96TH
$23 off 169: IFPNWDNL + IFPQJ87N
$40 off 279: IFPUO1PR + IFP5RMUG
$55 off 379: IFPODXWB + IFPAINQF
$80 off 559: IFPB6AGN + IFPWCBPI

>AliExpress USA New Users Codes October 2026
$3 off 10: IFPBCAYF or IFPKKQPT
$5 off 20: IFPAA4UY or IFPJMFNV
$12 off 80: IFPBC3OB or IFPHNBYB

https://cheerful.cheap/ should be added to the useful links, it holds a lot of value.

>>110002783
So how's life down under mate?

File: IMG_20260429_233055.jpg (1.08 MB, 1200x1598)

1.08 MB JPG

>>110003057

There certainly was an appeal to buy Cypress SPI FRAM for some time for "near" infinite writes (10^14) and low latency ~90ns whilst being non-volatile. I never bothered to combine it with my GPS modules as logger/blackbox.
By the time you get knowledgable about an interest, you realize how much better you could do it with other parts and it kills the fun.
My junk box still has enough parts for future me to tinkertranny.

>>110002999
>By the time you get knowledgable about an interest, you realize how much better you could do it with other parts and it kills the fun
Isn't that precisely part of the fun? Keep the scope of your projects reasonable and each time you revisit you get to implement a shitton of better solutions than the last.

am I missing it entirely or did aliexpress remove that weekly piggybank coupon from their app?

File: IMG_20260428_233034.jpg (2.19 MB, 2598x1200)

2.19 MB JPG

>>110003162

>>110003057
>Isn't that precisely part of the fun?
So it seems! So it seems!
>Keep the scope of your projects reasonable
I try to follow that rule, the faster I can finish a project, the less chance I cancel it
>and each time you revisit you get to implement a shitton of better solutions than the last
There is nothing worse than a perfect solution, some of my projects run for 10 years now, like wireless displays with WPA2 that get data via UDP from an orchestrator. Since I fix only details in the backend the frontend never required any fixes.

I only wanted cool projects like this anon's:
>>109886919
But I don't know a problem to have reason to buy and play with an FPGA. I'd need something that doesn't work in regular code on an MCU. Even FFT for audio visualizers is just fast enough on an esp32 or stm32. Still have a sealed Nucleo32 around here. STM32 is good for precise PWM. One day.

>>110003091
Cool shit, I've also got some old projects that work good enough to not warrant an rebuild, but not good enough to make me happy when using them. Part of the journey I suppose.

I assume you're aware of >>>/diy/ohm and >>>/diy/mcg ? Those are very comfy generals for this type of hobby you should check out if not.

File: 123123.png (10 KB, 403x159)

10 KB PNG

>>110003473

>>110003162
>I assume you're aware of [DIY]
Thanks for reminding me, I am but I wasn't over in a long time due to how slow these threads move, but the quality over there is appreciated.
>Cool shit, I've also got some old projects that work good enough
Thanks anon, what did you build for yourself?
>but not good enough to make me happy when using them. Part of the journey I suppose.
Ah yes, I retired a signal-cli bot that I once wrote for gas station prices.

And for hardware, there is no shame to build stuff others made:
https://desuarchive.org/g/thread/90605488/#90607534
https://web.archive.org/web/20201112213643/https://github.com/solokeys/solo/issues/353
old post of mine, fido2 webauthn today meme'd as passkeys (x.com), it supports u2f too (github)

>>110002974
focking great m8

>>110003185
>due to how slow these threads move
While that's not the best for entertainment, it's why all those threads moved over there. Unfortunately a board like /g/ is just too fast, any serious discussion is necessarily slower than bait/shitpost threads, so it gets pushed to page 11. DIY being so slow is what allows for those discussions.
>Thanks anon, what did you build for yourself?
Motorized and automated a manual coffee grinder to live in the network, check if I'm in the wifi, and if I am it grinds my coffee in the morning when so it's fresh when I wake up.
Currently working on a cocktailbot and a wristwatch, which will be the first pcb design I've ever done rather than soldering onto perfboard.

File: kepler.png (793 KB, 911x985)

793 KB PNG

>>110004330

>>110003473
i have returned to check the thread
>Motorized and automated a manual coffee grinder to live in the network, check if I'm in the wifi, and if I am it grinds my coffee in the morning when so it's fresh when I wake up.
That seems useful, I get why it tastes better not shelving it the night before and how it saves time in the morning. Automating daily tasks that steal time was often recommended to me by others as top tier project.
>Currently working on a cocktailbot
Shame I am a teetotal apart from other recreational things, i never drink or smoke
>and a wristwatch, which will be the first pcb design I've ever done rather than soldering onto perfboard.
Oh that is a hard project, linking you this
https://github.com/PegorK/F91_Kepler

>>110003996
>That seems useful, I get why it tastes better not shelving it the night before
I also happen to love the smell of freshly ground coffee in the morning. Unfortunately since then I've got a better machine which does all the grinding and measuring for me (I just press a button) and is also much faster, so I rarely use it anymore, but I used it for a few years.
>Automating daily tasks that steal time was often recommended to me by others as top tier project.
If you have something like that, then sure. But I find that it can also trap you in a sort of grindset/hustle mindset where everything has to justify itself with productivity gains. I like having a few projects that don't really have a useful application, it's either just for shits and giggles or something you appreciate for itself.
>Shame I am a teetotal apart from other recreational things, i never drink or smoke
Probably a healthier way to live. To be fair I don't actually drink regularly, I'm a social drinker, so only with friends. But I wanted to build the bot, and expose a rest api to the local network and then have a companion local webpage that you can deploy from phone or pc where people can log in and "order" cocktails. The bot side will be pretty boring though, might even get away with a simple ESP8266, some motor controls, feedback switches, a few sensors. But I figured it might be fun when you have some people over or at a party or something.
>Oh that is a hard project, linking you this
That looks really cool. Mine will be in an analog watchcase, my main issue is battery life and that I want a small electroshock circuit, which makes battery life even worse. I don't really need it to do any smartwatch stuff, I had two and never really used either for anything but reading the time. Ideally I'd even have an analog watchface, but getting the gearing right for that is a massive pain in the ass and repurposing an existing one usually interferes with the circuitry around.

File: Sa35d365acdf949b5828f1eb6(...).png (1.9 MB, 1200x1200)

1.9 MB PNG

>>110004636 >>110007921 >>110008053 >>110008962 >>110015367 >>110015401

>>110004330
I will reply more later but you might be aware of round displays already on ali, small ones for watches exist too. 5" / 12 cm is already worthy of a small pedestal on a cupboard.
I lack the skills though to integrate small displays. some may even have touch which is probably the point with the large ones as well.
Hope I can reply more later

>>110004373
I'm aware of them, iirc they use a square input for the image and it cuts off the corners, which is a little weird, but they do seem neat.
They aren't an option for the watch though, too high power draw. If possible I want to have something that lasts a substantial amount of time on a single charge, so LCD will likely be my screen of choice. I never liked the idea of having a watch I need to charge each night or something like that.

File: shock_device.png (38 KB, 1565x763)

38 KB PNG

>>110005803 >>110007216

>>110004330
>Mine will be in an analog watchcase, my main issue is battery life and that I want a small electroshock circuit, which makes battery life even worse.
Indeed a difficult project, especially with high voltage near ESD sensitive parts. To wake you or something more fun? Charging a DC capacitor for one burst shock is more practical than a transformer for constant AC.
>>110004636
>Ideally I'd even have an analog watchface
>so LCD will likely be my screen of choice
Oh that will be hard to source, surely it will exist, but have you considered just sourcing casio watch replacement LCDs?
Maybe driving them is easy.
>I find that it can also trap you in a sort of grindset/hustle mindset where everything has to justify itself with productivity gains
Oh I avoid life optimization projects. My life cannot be optimized due to non-faked diagnosed ADHD. It is not fun, and it is not a superpower at all. 90% of the time it irritates me.
Often people have cool planners and time schedules that simply do not apply to my perception of how time passes.
> But I wanted to build the bot, and expose a rest api to the local network and then have a companion local webpage that you can deploy from phone or pc where people can log in and "order" cocktails.
Yeah I like that, maybe connect it to a mini fridge with juice containers.
I think a peristaltic pump with medical grade silicone tubes allows you to pump liquids safely. They need replacing though when they get brittle. I worked in the chemical industry and labs.
A few rollers and you are good. Do you have an arm for the bot?
I failed at getting servos work with a decent torque, a very expensive hobby to get into robotics. My advice if you want to hear it: Use a conveyor belt for the drink glasses.
I might reply more again later. It's ADHD related. Mind's already spent again off meds.

is nobody ordering anything anymore? i get it the weeks are slow and the best day is friday on this site

File: file.png (754 KB, 1030x1190)

754 KB PNG

>>110005797

I wanna get into food prep, anyone got silicone molds that are good in the freezer that won't give me 3 different cancers?

>>110005769
silicone/teflon usually tolerates up to ~240°C
if you worry about volatiles that cause cancer, bake them out in an oven at 180°C for 40 mins
usually teflon (safe itself) carries more volatiles (organ damage/cancer) from production and is of more concern
since you probably lack an outdoor oven with an extension cord crack your windows open
t. former chemist, so far not dead

>>110004954

why falseflag light emitting diode

>>110005803
>why falseflag light emitting diode
My upload that I totally looted from eevblog?
https://www.eevblog.com/forum/projects/usb-killer-v3-reverse-engineering-in-progress/
anon wanted a sado masochism watch to wake him from a coma, so I extrapolated

im still waiting for my order...
usually they group multiple items together, but now they are being delivered piecemeal.

File: aliexpress_order2.jpg (43 KB, 1173x460)

43 KB JPG

>>110007216

>>110005714
my order has been delayed, how do i claim my 1 dollar?

>>110004954
>To wake you or something more fun?
A bit of both. The original idea was just to mostly imitate a pavlok, which was a indiegogo in 2014 (fuck I'm old) about wearable that would shock you to break your habits. Apparently it's a success seeing as they're still around and have like 3 or 4 products now. Somehow that concept seems to have stayed in the back of my mind and fermented and I always wanted to have a watch that would show the time but also be able to vibrate and give a small electric shock. I had other features in mind, but LCD screen plus high voltage capacitor circuit is already complex enough for a first pcb project.
>Oh that will be hard to source
Finding an LCD display really isn't. Finding one that doesn't get damaged from the shock circuitry however is a different issue.
>I think a peristaltic pump with medical grade silicone tubes
That's what it's gonna be. Considered other pump types, but none are as good in terms of servicing, cleaning and food safety as peristaltic pumps. I also considered diaphragm but cleaning those is a pain.
>Do you have an arm for the bot?
Nope, not even a conveyor or anything. I have a V0.5 which is made of wood, with a printer like belt-driven conveyor and using analog shot dispensers (those in bars that dispense exactly one shot) with some servos, but it's a piece of shit, constantly breaks and doesn't actually add any advantage. It'll just be a station with a weight sensor that you put your cup under. Maybe some nfc reader to associate cups at most, but probably not even that.
I was also interested in a robot arm as an unrelated project, but that'll either use nema17 steppers, which have shit torque, or I'd have to use nema23 motors which would quickly be expensive for a pure hobby thing, mostly to play around with inverse kinematics and matrices and such.
>>110005714
Europe is fucked until 2028. Then it might pick up again.
>>110006757
You should have a button in the app. No idea on pc.

They will increase the eu cuck tax further november 1, so if there's something you forgot to order before the initial cuck tax back in summer and you actually do need order now. I'll order a couple of fans for an old laptop that I need, fu eu.

>>110007507
What is it now? Like a higher VAT or what?
The 3€ flat rate increase fucked my electronics purchases sadly. I don't really care anymore at this point, that alone was the deadly thrust.

>>110007653
another 2-3 euro per item category called "handling fee" (translated from my language), which is pretty funny since the postal service here already take a "handling fee" of like 18 euros per fucking package since the cuck tax was introduced. I wouldn't order either if I didn't need to, I thought I ordered everything I could think of I needed the next few years but missed getting a couple of spare fans for my old reliable laptop, changed to my last spare this summer for it.

>>110007727
I mean it doesn't change much because I'm not buying shit anyways, but that's good to know. FML this hobby and my electronics hobby are dead unless I save up for a large mouser order now.
Each order now costs +(3n+2)€ with n being the amount of categories of items.

https://taxation-customs.ec.europa.eu/customs/eu-customs-reform_en is the link about it, their guidance is 2€ handling fee, though that's up for national discretion.

File: tiny screen.jpg (1.69 MB, 3120x4160)

1.69 MB JPG

>>110008962

>>110004373
why is always that wallpaper

>>110004373
Those look like VR displays tho

>>110008053
nah vr displays wouldn't have touch

File: quickshot_261007_213045.png (485 KB, 1224x500)

485 KB PNG

>>110002000
I need to clear my cookies.

File: 1671528465317887.jpg (22 KB, 511x321)

22 KB JPG

>>110009356

>>110004373
>>110007921
My neurons activate with small screens, I've no idea why tho.

File: SC13A.jpg (85 KB, 800x800)

85 KB JPG

>>110008962
Small things are cute.
I got a tiny flashlight and it's adorable.

best chinkshit that would let me simulate the experience of paizuri?

>>110009586
You're asking the wrong people. We're but apprentices, maybe with a few students at most.
To consult the masters of their craft, visit
>>>/jp/ona

>>110007216
>until 2028
why 2028?

File: 1790576327840158.jpg (20 KB, 447x447)

20 KB JPG

>>110011627

>see item I want on ebay
>bid 200
>someone else wins with 205
>seller cancels and relists auction
>decide not to bid again
>someone else wins with 195

Was it worth it, you flying faggot?

File: 1787207930547796.jpg (25 KB, 622x505)

25 KB JPG

>>110036844

any recs for firestick alternatives? I need something for my parents, so if it needs to be fiddled with it has to be a set and forget kind of thing

> out for delivery yesterday
> rajesh never showed up

>>110010941
Because the current fees, which are the ones that made all the euros stop posting as much, are temporary.

The current system is a stopgap, designed to slow the import of packages and disincentivize many small imports until they have time to set up a unified, better optimized customs system for the EU. That's meant to go online in 2 years, so the current fee is just for that time. Once that time is up, the new system replaces the current one, which will be normal customs fees based on categories, types etc, all pretty automated.
From a policy perspective that's not totally unreasonable and I get what they were trying to do, but the way it's implemented is retarded. The new system is not going to be perfect either, but for CSG a flat 3€ fee/category is poison, while proper tarif fees later will be more of a disincentive.

>>110011190
>looking for a cheapo video card
>have to browse past the "empty box" listings
>and the replacement fans from china
>and the international listings
>ah finally, local sellers selling their cards
>some of them obviously mined and branded as used, very light gaming
i am going to scream

>>110005797
Good to know, thanks anon

File: rii i8 plus.png (455 KB, 1000x1000)

455 KB PNG

>>110013661 >>110014636 >>110015107 >>110019077

I have one of these coming, hopefully I get it next week
Did I make the right choice? I should have asked about remotes/keyboards here before I made the purchase
I just want to shitpost and navigate through jellyfin from my bed. It's the 2.4ghz model and it has usb-c charging...

>>110013649
are you the same ass nigga that thought it had bluetooth

>>110013661
nope I havent really posted in here before, only lurked
I was well aware of the connection type. I didn't want to screw the network antennas onto my pc so a dongle suits me better, as long as it doesn't suck.

so my normal AliExpress account has free shipping but only over £8

My old dormant one seems to get free shipping on anything choice regardless of price. I made an order with it a week or so back. i also have some limited one time offer where some items are a bit cheaper.

What's the deal there?
should i use it or just use my main account+coins?

>>110013661
no that's me
i'm going to order a bluetooth one
this time i will make it right.
this time....

>>110013649
it's fine

>>110013649
I have three of these, older model though, one uses AAA and the other two use micro USB charging
I have them connected to my main battle station, my mini PC that works as the home server, and the dock to my Steam deck. They all work perfectly fine, even though the trackpad is kinda flimsy at times

File: images.jpg (33 KB, 764x401)

33 KB JPG

>>110004373
I wonder if those round displays could be a good fit for robowaifu eyes

>>110004373
i want to see this applied to "32 or 55 inch android tablets infected with spyware" to lobodomize them and make them just a display, nothing more nothing less

>>110011553
trvke. I bet there's still dropshippers buying items of the same category in bulk and only paying a single 3 euro tax, then making another order with a different category, and so on while the avg eurocuck sees multiple 3 € on their cart and gives up

where are the chink shit

File: Picture 2026-10-04 16-04-09.png (964 KB, 1920x1080)

964 KB PNG

>>110017178

>>110016804
I'm still consuming but the 4 channels won't let me post pictures.

>>110017167 (Me)
Oh, it worked. Annoying when it's unpredictable when it decides to strip my uploads or not. That's a photo taken by those $10 USB microscopes. I used it confirm the torn pad goes down into the PCB layers and into who knows where. I fucked up and broke that board forever.

File: IMG_7909.jpg (222 KB, 1125x1013)

222 KB JPG

>>110018912 >>110019176

Yeah, I’ll take four of her.

>>110018907
but how anon, there's only three left!

>>110013649
one thing i have to say about the keypad is that swipe/predictive typing on phones has deprecated physical keys like this so very much. the keys here are spaced too far apart and it's in a grid instead of like a keyboard where every row shifts a little. it's a bit awkward compared to say a blackberry but it's better than nothing

>>110014636
this gweilo buying the same thing for the third time

>>110019077
>like a keyboard where every row shifts a little
That's just a holdover from the typewriter days when they had to be staggered.

>>110018907
uh oh, did I spread flashlight autism or do you already have it?

File: 1776896140260365.gif (2.77 MB, 287x191)

2.77 MB GIF

>>110019077
>this gweilo buying the same thing for the third time
plz no bully
i made the order
the needful is done

File: IMG_4098.jpg (223 KB, 960x1280)

223 KB JPG

>>110019290

>>110019176
Don’t be so Full of yourself! Do you think you’re special? Flashlight autism is a very common thing here, has been since way before the convoy days.
That said: I’m not too autistic about them. I have a Petzl headlamp for climbing and /out/ stuff and a sofirn for work/backup and a few more that I forgot about, so I’m fine.

>>110019233
Nah, it's just that I've been stacking discounts to grab some Sofirn stuff and was looking for a headlamp with red at around the same time as your post.

File: file.png (723 KB, 1346x766)

723 KB PNG

>>110020953

never seen people mention it here but goofish / xianyu is insane you can find a tonne of really cool and cheap things there but you do need to use a proxy service. taobao is good also but its not people selling used stuff

i have tried both cssbuy and superbuy proxies both are good. id say cssbuy is better because superbuy will not let you buy pokemon stuff. if you dont care about that superbuy has built in searching for xianyu and cssbuy doesnt

i need these for my ps3 you cant get them on aliexpress and if you go on ebay people are selling them for like 15-20 dollars. chinks selling them at 11cny each which is only 1.64 dollars

File: 1766312425125934.png (158 KB, 1325x826)

158 KB PNG

>>110021318

>>110019891
Superbuy's 20CNY fee is bit expensive for xianyu, so better to place orders by yourself. Otherwise it's great.

>>110020953
>so better to place orders by yourself.
what do you mean?

File: 1762520070896314.jpg (261 KB, 1389x521)

261 KB JPG

>>110022796

Bought this cheap chink wireless charger, top coil stopped working after 2 days and now neither of them work. When plugged to USB-C it makes clicking noises (about once per second), any expert on this matter?

File: aliexpress_order_delay.jpg (24 KB, 983x181)

24 KB JPG

ITS OVER. WHY WHY ME!

>hmm I wanna buy this, but sale is right around the corner, better wait
>sale arrives, item is more expensive, with the coupon it comes around the same but I have to wait longer for it to get shipped

every time

>>110021765
probably the mosfets, the 4 six legs components near the coil cables, are broken, they usually are n+p mosfets to create an h-bridge

>>110022796
Alright thanks.
I think that's beyond my capabilities, I don't think I would order bunch of electronic parts just to fix a $8 chinkshit.
The Essager I bought still works, avoid no brand.

> Gurpreet will deliver your package within the hour!
Sometimes they use several different courier services across different orders. It's like a race to see which sar will deliver my shit.

>>110023646
You get saars? In my area Ali and Temu always get local chinks delivering my shits

File: VID_20261010_015945.webm (3.94 MB, 720x1280)

3.94 MB WEBM

>>110027283 >>110031598 >>110042776

>>110002000
wanted a label printer for a while now, but in stores i can just find those archaic brother ones with fucking abcd keyboard which gives me aneurysm.
This little $20 thing is fucking amazing, you can pretty much do whatever manipulation you want with the text as long as it fits the tape, you can load custom fonts, invert mode if you need white letters on black background, you can even print images, i used it for hours today, never jammed or lost connection to the phone, i don't even know how much charge it had from the factory but after printing a generous amount it's on 73%.
https://www.aliexpress.com/item/1005005672068014.html

File: 1_ba3eda1b-449b-4ab2-8823(...).jpg (103 KB, 1600x1600)

103 KB JPG

>>110024848

>>110002000
Bought 4k version for $35m it's great, autofocus works flawlessly, you even have 1080p 60fps, considering logitech barely gives you full hd at this price point this is a steal.

>>110024695
I wonder how it compares to high end logitechs like the old one with CZ optics.
There was a brief time when you could get camera modules from high end laptops fit inside a 3D printed case and they'd have great quality. But now that laptops are moving to MIPI those may be going away.

>>110024623
Has anybody made open software for those like with the cat printers? I refuse to use stuff that needs a random app.

>>110008350
You don't control vr games by touching the screens with your eyeballs?

>>110014625
Maybe they switched your dormant account to be a new user so you're seeing some sort of new user discount?

File: 1774695228159543.jpg (53 KB, 1040x660)

53 KB JPG

>>110002000
Thoughts on the ambernic rg dds vs the retroid pocket duo based on what we know?

chink shit

>>110027604
but i thought the new user discount was just on one item right, as a welcome deal?
I actually did have that but I used it. It's still offering me free delivery and some items have a one time discount offer


could it be that to compete with Temu etc they treat "new" users favourably for a brief period of time now?

File: IMG_7610.jpg (1.37 MB, 3024x2980)

1.37 MB JPG

>>110036142 >>110040173 >>110044699 >>110054731

My cheap PTM7950 (probably fake) and shit thermal paste arrived. Look how how my laptop heatsink surface looks. That massive scratch was there when I first lifted it and looked at it. The grey blobs aren't removable. Embedded in the metal or something. There's another dent to the bottom right of the scratch.
What the hell, Michael Dell? You spent all the money your wifes botched bogging surgery or what.
Oh well, initial results from the PTM7950. Cinebench R20 scores returned to the benchmark comparison rating from being down a few hundred.
I turned into Michael J Fox trying to apply the tiny square of the CPU and GPU though. Got the shakes like crazy and took to attempts to apply it properly. Good thing they sell a big square for so cheap.

>>110024623
Small labels limit scope a lot unless you intend to only use text and no images. I've a 4x6 one for shipping labels, they're nice for those times when you need them.

Anons, i bought a baseus bc1, shouldn't it come with a charger?

>>110032106
Probably not. Nothing comes with a charger these days.

>>110031598
i mostly ordered this for, labeling cables, wall plugs, patch panels etc, so for my use case it's great everything else is just extra, i also made sticker of my slav characters for my US mechanical keyboard a, it was great since keyboard mostly has black keycaps with white letters, so invert mode was a godsend.

>>110033159
Come to think of it, that little label printer sounds like it'd do great for printing out dual language keycap stickers. Does it come with any translucent/transparent label rolls?

>>110031358
Wow, what shithole are dells built in?
>>110032289
I saw the other day that even laptops don't come with chargers anymore.

>>110011320
don't bother it will just become a residential proxy node

File: csg2.png (85 KB, 257x227)

85 KB PNG

>>110032106
Small review.

It works, its firm but does not fit well in my left ear.
I know nothing about music to talk about brass/tremble etc, but sounds nice.
The microphone works but is not good.
After 5 hours my ear was hurting a little, but i would imagine im just not used to it yet.
It has physical buttons and can even change the volume.
Cost $14 plus a case (that i needed for the coupom to work).
It is only useful for when im home, but i wanted one for me to listen to audiobooks while i rest so it will work nicely. Otherwise my space travel does its job.

>>110002000
Smooth thread number btw

File: aliexpress_order3.jpg (245 KB, 1040x1280)

245 KB JPG

>>110037587

my order arrived, sans the large item, which will probably take till November. small orders are fast, large items will take weeks.

>>110037453
sweet looking LED strip

>>110037587
its not an led strip, its el wire, i wanted to buy it to test it for cos play application, but it turns out that they arent that bright in day light situations. still they are cool looking

File: Screenshot 2026-10-11 165248.png (439 KB, 868x957)

439 KB PNG

>>110042828

>>110033883
i didn't get any personally, but there is, just ordered some and we'll see how good is it, also failed to mention, you can buy various pre cut stickers for it like these specifically made for cables or other various designs

>>110030665
My orders are also shipped quicker on the "new" user account.
Cheeky Ali

>>110037587
Thin COB strip is probably brighter, but one sided and it gets warm.
Flexible LED filament is seemingly really expensive and kind of fragile.

Got a maybe interesting home project that maybe already exist a chinkshit solution, so I figure I ask you guys:
I'm looking for a way to alert me when my washer and dryer finish their jobs. They are dumb appliances with no WiFi or smart home shits what so ever. My loads vary each time so just a timer is kinda a hassle. I'm hoping for something that will notify me when the job is done so I can go down to the garage and put clothes into the dryer, and then to get my clothes out.
Right now I'm thinking that a vibration sensor might be the way to go, something I set on my washer and dryer when they are working and get a pin when they stop i.e. vibration stops. I know there are chinkshit vibration sensors but they tend to be require shitting chink apps

>>110038918
you're way overthinking this, also the vibro sensor seem way to unreliable for this use case to me, do you machines posses any kind of notification that they have finished, like the END led or something, just hook up a raspberry/arduino whatever you planed to use, and code it to give you notification when led turns on, hell you probably have some finished solution if you search enough on aliexpress.

>>110031358
> Cinebench R20 before: ~2200
> Cinebench R20 after: ~2200
> Original score when new: ~2900
I looked at the chart wrong. I remembered wrong too. Both pastes did fuck all. Same results with dry crumbled old paste as the new shit. The "PTM7950" is the exact same as this garbage MJ Tech paste.

The performance of my laptop is down to nearly 2/3rds its original. Can good paste account for that much different or is there something else wrong with my computer?

>>110002000
Shouldn't this general be Chinese Shit General? It doesn't feel good using a slur here.

>>110024623
that's pretty cool

>>110037820
Good to know.
Also, I went hunting around. Turns out there's some open source projects out there intended to work with these little Marklife printers (none for a mobile platform yet). I think I'll have to pick one of these little bastards up for the hell of it.

>>110033159
>>110033883
Thermal paper often contains BPA or BPS which are endocrine disruptors. It transfers onto your skin when you touch it and can be absorbed, especially if your hands are sweaty or greasy.
Labels for cables are probably fine sine you don't often touch them but I'd be cautious about sticking it on my keyboard. Perhaps I'm paranoid but you can look it up and decide for yourself, thought you should know anyway.

Any cheap cameras recs for computer vision? I do cv for work but suddenly got the inspiration to set up some cameras around my place to detect animals that come into our garden.

>>110042846
Dude, I'm American. I'm probably poisoned in more ways than I can fathom, on top of my already horrible smoking habit. Though I do appreciate you taking the time to warn me.

>>110042846
If it's printing waterproof labels then the actual thermal material will be sandwiched between plastic and adhesive anyway.

File: S0ac4338981864f4f88a3f749(...).png (604 KB, 800x800)

604 KB PNG

>>110061424

what are your favorite fidget/desk toys csg?
I really like the 3x3-square gear spinner

>>110037614
EL wire is good for doing cyberpunky clothes for nightclubs or raves, and I think that's probably it.
>>110038918
Could you get a current sensor and wire it up to a esp32 or whatever that pings you when the current drops to near zero at the end of the cycle?

>>110040545
It's ok anon, we have a chink pass

>>110031358
Another update. I tried the fake PTM on a Ryzen 2700x that I haven't been using. Idle and load temps went up. I don't know whoever posted saying that even low quality paste is better than old paste. That comment stuck with me for some reason so I figured how bad could it be. Bad. I should have known better than to trust a stranger on the internet.

Anyone have any luck with chink RAM manufacturers? I'm looking to get some more server RAM for the chink mobo I bought.

>>110044699
why the fuck are you using it on anything that isn't a bare die to begin with
plus it takes a few cycles before it'd work properly

>>110044706
Check your local market place first, especially 2nd hand ECC ram, lot of supply with few buyers because nobody owns server mobo.

I’d love to bump this thread with more than just a bare bump, but the current tax situation makes this rather hard. Sorry folks, stick in there!

File: Screenshot 2026-10-13 at (...).png (30 KB, 926x287)

30 KB PNG

>>110052683 >>110053059

i'm happy to announce that this very cheap charger sort of lasted longer than a year and didn't burn down my house. temps hit around 30C today which overheated it and i heard a sharp popping sound (a tiny capacitor) so the quickcharge slot doesn't work anymore and i'm not brave enough to keep using the other slots.
so into the bin it goes. not bad for $2 AUD.

>>110048328
Goddamn they're taxing 4chan posts now? EU needs to be stopped

File: ofcom3.jpg (194 KB, 940x1410)

194 KB JPG

>>110050459
>they're taxing 4chan posts now?
The UK unironically tried

if i'm looking for a pcie sata expansion card, which one should i get?

Do I wait for 11.11 sales at this point?

>>110050819
>got power to burn
Old HBA cards
>got money to burn
New HBA cards
>got neither
The usual asmedia adapters

>choice order made 4 days ago still stuck on processing

ffs i'm not getting this am i
it's not even convenient to re-order because it's under the threshold for free delivery.

>>110048957
>overheated it and i heard a sharp popping sound (a tiny capacitor)
This doesn't sound like good news anon
This more sounds like a case of why you shouldn't cheap out on chargers. I wouldn't be happy to announce this anon!

File: 61-ixwChJEL._AC_UF894,100(...).jpg (73 KB, 894x849)

73 KB JPG

>>110048957
These things always collapse if your draw the wattage they claim to have. Measured it with a USB volt- and amp-meter. Draw the max current: Voltage drops below required level. So far only my stock power supplies that came with my appliances deliver the actual V/A.

picrel made me trash so many chargers as e-waste, no time to charge my phone for several hours extra because the PSU is a lying piece of shit

Anons? How are you?

File: 1.jpg (116 KB, 2443x1438)

116 KB JPG

>>110058173

>>110031358
>>110044728
I cleaned off the MJ tech on my laptop and went back to the PTM so I can cook it like a roast.

I didn't mention the first time there was also a chip in the CPU. That's more egregious than the shit heatsink surface. I looked around more while I had the cover off. There was kapton tape covering half the thermal pad on the NVME drive. Whoever assembled this was on crack cocaine. Is Dell known for such shit quality? I paid thousands for this piece of shit.

>>110045541
Thanks for the heads-up. I never realized how cheap used DDR4 ECC RAM is.

File: 1779052296375399.png (744 KB, 750x750)

744 KB PNG

anyone tried chink shit acrylic cases(?)

WHAT THE FUCK IS MOXIBUSTION.

File: 1773140420531900.png (281 KB, 447x447)

281 KB PNG

>>110056328

>>110056328
Pro sports athletes shill this. Probably those companies are buying these and selling the service for 10000x profit

https://byzindustries.gumroad.com

File: COMFY.png (394 KB, 1226x536)

394 KB PNG

>>110057667 >>110059575

COMFY
O
M
F
Y

>>110057364
>jeets suit for winter
lol

File: 1757321608682979.gif (2.78 MB, 350x263)

2.78 MB GIF

>>110054731
I dug up my past notes from several years ago. There's a UEFI BIOS setting that gimps laptop performance.
Laptops can draw power from AC Adapter + Battery or just AC Adapter. When it's set to the latter, the laptop can't sustain as much power usage. For some reason this setting got switched off.
On top of that, my undervolt settings got wiped. How or when did this happen I haven't got a clue. I've been using this artifically crippled system all this time.
I remember stumbling on this strange feature years ago. I didn't find any mention of it anywhere online. Good thing I took notes and saved them. Thank you, past me.

>>110057364
kek

File: 1730757281025306.jpg (71 KB, 650x600)

71 KB JPG

>>110059799

I'm currently in China RIGHT NOW
Is buying RAM from here advisable? I'm planning a server build with like 256GB DDR4 RDIMM (8x32GB). There's locsl brands but I'm not sure where people buy from for local shipping

>>110059635
Yes if you buy known brands, found on used servers preferably, also ask a chinese friend to buy for you, don't buy yourself or you'll get the laowai tax.

I'm looking for a upgrade for my Pinecil v2 solder iron. I've narrowed it down to these two.
GEEBOON TC22 or Sugon T21.
Can't decide.

>>110060152
>sugon

>>110060152
i have a geeboon tc22, i like it a lot, had way better luck with it than usb irons but i still dont know how the fuck youre supposed to desolder xbox sticks properly

>>110060691
sugondese

File: 1766391775851168.png (77 KB, 1462x417)

77 KB PNG

>>110060881

>>110060769
my highly esteemed negro, you need desoldering braid, flux, and to add new leaded solder to the leadfree before it gets sucked up/braided.
I can vouch for this stuff even if it is a bit pricey.

File: 1777592871975913.png (243 KB, 1381x666)

243 KB PNG

>>110060795
also this seems to be an exact clone of my engineer sucker.

>>110060769
Alright it seems like the TC22 is the way to go, looks like it has more power as well.
As for desoldering I believe something like the ZD-915 should suffice, I have one coming tomorrow. Although I got mine off Amazon since it ended being cheaper there.

>>110043907
I play with some knives

File: tech worker purchases.jpg(...).png (590 KB, 1377x616)

590 KB PNG

>>110062485 >>110101416

>AliExpress recommendations

Should I wait for 11/11 or is it going to be nothing special like the last year?

>>110061884
There's always higher coupons. The era of crazy events seems to be over though.

File: file.png (592 KB, 1600x1600)

592 KB PNG

>>110064846 >>110067175 >>110067252 >>110074697

after 3 years of good work, my ht05 took a trip to the washing machine and probably won't survive(waiting for it to dry)
What is the current meme budget earbud? moondrop?

File: 61QkhG2dXYL._SL1500_.jpg (69 KB, 1500x1500)

69 KB JPG

>>110064730
Best thing to do is give it an Isopropyl Alcohol bath asap. I've washed buds in a machine twice. My first ones even worked great after drying out then went bad after a couple of weeks later. Alcohol bath brought them back from the jaws of death. Just fully submerge it in the stuff for an hour.

chink shit

>>110064730
I got Realme Buds Air7 and they're really good.
I only wish I'd gotten a pair with wireless charging since my new phone has reverse wireless charging so that'd be handy.

But the sound quality is really good, and the ANC is really decent for the price.

>>110064730
>>110067175
Also, forgot to mention I just went on scarbir and got what seemed like the best fit for me for the money.

I think my million game points are supposed to expire soon but I haven't seen any warning about it.

>>110067699
There's no warnings about the diamonds. It just goes poof.
Has anyone even redeemed the $50 lately? I've written it off even though I'm a diamond multiimillionaire.

>>110067883
>There's no warnings about the diamonds.
Not according to some random screenshot I saw, but who knows with Ali. I've never once gotten anything over $5 and I can barely get $1 anymore. I'll either exchange for game stuff or cycle it through the pinball.

>>110067883
>>110068097
Seems like I'm wrong anyway. I thought it was 6 months but it's actually 12.

>>110067883
>earn a million points
>can not redeem
That's some elaborate indian scam to waste your time.

>>110068285
I've exchanged it twice before they opened it up to everyone. Otherwise I wouldn't have bothered trying to earn more. It's over now though. It went from an obtainable perk to a lottery.

>>110067883
Lately, no. But I did get lucky like 5 months ago and redeemed, sir.

they extended my elite membership to jan 17th which is naisu

>>110068332
i'm 55 days away from finishing it again. see if it's any easier to get the $50's now that the europeans have left the pool

chink shit

Tried ordering from AliExpress with the new fee shit. I ordered 8 items. 5 from the EU, 3 from china. All came through with no extra charge or anything.

File: file.png (244 KB, 1895x1053)

244 KB PNG

>>110027283
you can DIY now

Any decent phone controllers to play a few emulated and recomp games from time to time? Looks to spend as little as possible.


Snca but I got a surgery recently for hyperhidrosis and I can finally play games in bed without my hands sweating so much. I'm so happy

>>110011553
staring november its gonna be 5€ for every category but nice to hear its gonna get better in the far future

Any of these chink vr headsets that are good enough for a little porn?

>>110074485
>Any of these chink vr headsets
like what?
pico?

>>110074522
Just something cheap'ish to satisfy my gooning needs

>>110074551
i don't know what you expect
if you don't like jav, you will have a 'soft' time

>>110074485
from a phone right? they're all more or less the same, uses google cardboard app forked onto a bigger one that allows you to set stereoscope angles and stuff and can be controlled with xbox/BT controller

>>110064730
>moondrop
I have space travels, my first wireless IEMs and they're pretty good. Really wish they lasted longer tho I have to keep my ears plugged for at least 6 hours or I'm subjected to the HR Karen and the office's retard yapping nonstop

>>110074413
I thought that 2€ surcharge that starts then was per package not category?
Either way it's ridiculous honestly.

>>110074485
I don't understand VR porn. How much does turning the camera enhance the experience?

>>110076014
>turning the camera
no?
it's more like 3d
camera is still, actors don't move much

>>110075322
right now it's ridiculous I'm getting charged for the same items just because they're different colour.

>>110076098
>camera is still
Turning the camera while it's in a still position. Are you ESL?

>>110076014
It is a lot more immersive. Sure the end result is still your chink pocket pussy, but VR can trick your brain a lot better than regular POV stuff.
Try some of the massive titty VR porn if you get a chance. It really does make a difference

File: 6.jpg (996 KB, 2132x1599)

996 KB JPG

>>110080953 >>110087674

First haul in months came in

a lot of chink shit in here

>>110074211
Clicky dpad or rubber memebrane? It's important. Of course if you don't care about dpad quality, it doesn't matter. Your max spending price is also important.

>>110073746
Which country are you in?
And how did stuff come to you?
That’s important information.

I bought more flashlights

>>110078731
>Clicky dpad or rubber memebrane?
I think I prefer membrane. I got an Xbox controller for my PC and I don't like the way the DPad feels desu
Either way I don't care too much about the quality, I won't be using this controller too much, only for maybe an hour before going to sleep every now and then
>Your max spending price is also important.
Maybe less than 20 bucks? I've seen decent regular controllers on AliExpress at this price

how do you guys deal with a single project tainting your algorithm?
im putting together a haloween costume for a mates kid, so i went looking for a load of silver jumpsuits the wife was going to sew 3d printed fittings and some trim on to make a spaceman suit.

and now all my suggestions are bondage suits and "punk club prismatic" leotards, or what i can only really describe as "piss still suits"

how do i get aliexpress to give me back my comfy PCB modules and interesting stolen 3d printed designs for me to steal for myself?

removing the 5 or so jumpsuits from the browsed items didn't do jack shit.

wife's going to be suspicious if my recs keep showing up programmer socks and latex undies when i go to show her a neat custom bobbin spooler made from 10c of motors and piles of printed gears.

>>110078850
Denmark and it came in 2 seperate bags.

Can anyone recommend a reliable KVM switch that supports two computers (mac and pc) and two monitors and ideally will not brick any connected device?

>>110076014
i think you've got the wrong idea about VR. >>110076098 is right - VR movies are filmed from 2 stationary cameras stitched together to give 3D depth. it looks more immersive and allows you to zoom and look around from a fixed point which looks very nice using VR gear like occulus once you hit 4k resolution

>>110077042
well, well.....well....
remember: FN+F3 and hold for 5 seconds

File: Screenshot 2026-10-16 at (...).png (39 KB, 417x819)

39 KB PNG

>>110081568

the case cleared customs after 16 days and it should come on mon/tue/wed. very excited, but will be filming the opening since there's 2 panes of glass and the sheet metal is supposedly very thin.

>>110080349
View your electronics shit to down rank the other stuff..

>>110080975
mine cleared customs a week ago, and im still waiting.

>>110081568
oversized packages are handled a bit differently. for my country, once it's entered customs and cleared it, it becomes express mail where i only need to wait a few days

File: ???.jpg (75 KB, 1920x700)

75 KB JPG

>>110080307
>Dpad doesn't matter much
Bsp d11. Dunno what it costs now, but I got the white for 12 somehow. The sticks ARE hall effect, but theres a chance for the left one to drift until it decides to fix itself. It drifted like a bitch until I finished fallout 3. There's also the bsp d6 mini which can use both usb-c and bluetooth. The hello gamesirs x5 lite is another cheap option that's acutally decent, but they keep putting the usb-c port on the left side on their cheaper controllers. All work great in stuff like gamehub. When you want something better later down the line avoid meme shit line pic related

File: file.png (2.68 MB, 1800x1350)

2.68 MB PNG

Got a bunch of stuff to maybe fix my old phone that has a broken display.
Also a meh case for my new one as a backup.

File: 1767061412694814.png (56 KB, 856x568)

56 KB PNG

>>110085687

>>110074413
That's why shop from Taobao now on, with agents I pay that EU fee only once for whole package despite amount of items.

Poorfag folding phone? I wanna try one before getting the good shit

>>110083586
>Poorfag folding phone
Kind of an oxymoron.
Cheapest you can do that's worth using is like, the Razr or Razr+ 2025 out of the box (I wouldn't buy used folding phones).

>>110083736
What about one's NOT worth using?

>>110084357
Uhhh buy cheapest refurbished one, I guess, Samsung will still have software support even if it's years old.
Tbh I wouldn't use a 2026 model let alone anything older, the technology just isn't ready. These displays are so fragile and fingernails scratch them permanently.
Software and hardware-wise all of them should be top of the line for the time, so that won't be a problem.

>>110083211
Which agent do you recommend?

>>110080953
It's a gift for a coworker so in two months it won't be my problem

>>110085687
Superbuy is my choice, unless you need certain branded items or a lot Xianyu buying via agent. I have used Gtbuy too, but it's only slightly cheaper with 40% off coupons.

>>110077042
I have one of these.
please elaborate.

The chinks haven't figured out how to make cheap music instruments

>>110087694
Chinese guitars are honestly quite good. don't know much about other instruments though.

>>110087737
>>110087694
my first guitar was from ebay, made in china from the cheapest materials and construction possible for $35. got the basics down and moved onto a more expensive 2nd hand one.
i am eternally grateful to chinese ecommerce for enabling so many of my hobbies.

>>110087694
Just buy a Yamaha

every morning i check ali express hoping my package will clear customs and everyday i feel disappointment for the rest of my day. this cycle of hope and disappointment is wreaking my mental health.

Will we be getting Aliexpress 11.11 livestreams with chink qts again this year?

>>110088125
we didnt even get them last year broski

>>110084486
Yeah I can get a surface duo for cheap. Having the screen itself as the hinge sounds fucking insane.

How to bypass mandatory age verification via photo selfie on Aliexpress as a eurocuck?
Zero chance I'm sending a real selfie to their israeli (((partner))), and a portrait from thispersondoesnotexist fed to the browser via a virtual camera in OBS did not pass the check. Neither did uploading a real copy of some rando's country-correct driving license found online.

>>110089249
The software on those is unusable from what I've heard. And like, if you wanna get acquainted with folding phones, using something different doesn't accomplish that IMO.

I have been testing out this import fee shit the EU forced on us to see if it's actually a problem. I have placed 6 orders the past month and all of them got through without any issues. On the packages I can see it says it comes from the Netherlands so I guess they just reroute it and that can do it.

File: Screenshot_20261017-125220.png (1.04 MB, 1080x784)

1.04 MB PNG

>>110094939 >>110107116

I got a bunch of shit today
Here's some

>>110092831
What do you mean? Don't you see your fees added at checkup, it's roughly more than 3€ per item

>>110094209
the small workpro is fucking brilliant. it's so simple and immune to the dirt problems bigger knives have. i think it was 3 bucks so i'm gonna buy like 10 and lose them where i'll find them when i need them(pro and high iq move, write that down).

Any wallet recommendations? Don't need a new one per se, but tired of speckles of dust and whatnot accumulating in the wallet. Guess I'm looking for a design that is "sealed", enclosed. Must hold cards and paper notes, coins aren't essential. I've seen those card holders, where you slide out the cards with some lever or such. How durable are those type of holders? Are they hard to break and basically last forever or flimsy and fall apart quickly?

>>110080349
you have to delete them from viewing history

>>110083586
used xiaomeme/shitsung

>>110087694
>how to make cheap music instruments
they know, the problem is distrubution
do you realize that every epiphone is chink made?
on ali they only sell bootlegs
chinks actually lost, harley benton and other brands got so good it's unreal for how little you can get great guitar and amp/pedals now

>>110095308
I had one that was chinkshit and it fell apart cause it was cheaply made.
Someone gave me a leather card holder and it's great. Over time it just gets patina on it.

>>110087694
the m wave fm1 is really popular right now

>>110096626
i did mention in the post that i'd removed them from the viewed items, is there a separate list?

ive gotten it back to my usual now by just searching for my previous projects items again, but i still get jump scared by weird fetish shit like inflatable underpants or silver gimp masks every once in a while, but its like an intrusive thought instead of a constant annoyance while i look for arcade buttons and solenoids.

File: 1775119324033428.jpg (10 KB, 868x116)

10 KB JPG

>>110097141
it's only this on profile

File: aliexpress_order3.jpg (43 KB, 1224x568)

43 KB JPG

>>110097411

im in hell. i hate my life.

>>110097207
> Oversized Goods
Is it a doll?

how are aliexpress keyboards?

>>110097411
ill do a review if i ever get it

>>110098042
You get what you pay for basically.
Cheaper ones are all plastic and probably don't come with case fillers like foam and sound absorbing sheets. Many of them will come with the cheapest set of switches possible.
More expensive ones will have aluminum cases, different styles of plate mounting, foams and silicone sheets to fill the empty space, hotswap ability, etc. A number of these are barebones kits as in they won't come with switches at all. You buy your own and pop them into the hotswap sockets.

>>110098572
NTA but I've always wanted to try one of those hotswap boards. Any particular brand you'd recommend?

>>110098572
NTA either but the cheap mechanicals can still be an incredible value. A few years ago I got one with generic reds for like $15 with a mouse. Threw a dollar pack of o-rings on it and it's been on a secondary computer ever since.

>>110098693
I was one-and-done for Aliexpress keyboards and I'm a 65% layout kind of guy so I got a Weikav Lucky65 V2 a few years ago.
You can just search for Weikav to see all the other layouts they offer.
>>110098713
I won't ever fault cheaper keyboards for their value; that's where they shine. But once you venture into a barebones kits, it's all about the customization which isn't cheap. Value can still be had depending on the switches (like Gaterons) and keycaps you choose (clones) but you need to be ready to pay almost the price of the keyboard for some keycap sets if you want a set from smaller niche brands.

I'm looking for a sub $50 gooseneck kettle that doesn't have the inner spout painted.

i stopped buying chinese shit thinking i solved consumerism but i have now realised it actually seems to have gotten worse and i now just buy much more expensive items.

>>110099991
cool, im looking for a sub $5 dc-dc buck converter, whats your point?

I got my Bluetooth keyboard bros

It has Bluetooth. It has Bluetooth! There's a button for it and everything!

>>110061884
how many dildos do you need, anon?

File: 1783507331640580.png (221 KB, 422x289)

221 KB PNG

>>110101888 >>110106183 >>110108466

looking for monitor arms, i take it it's one of those things that buying from chang isn't worth it, even if they're still chinkshit?

File: 1776505446382484.png (7 KB, 160x160)

7 KB PNG

>>110110846

>>110101772
i don't exactly have a good one but i'd like to contribute that don't cheap out on one
pic rel is very meh

File: 1792328074577.gif (219 KB, 400x300)

219 KB GIF

Currently in Shanghai
Any good place to buy drives? I'm looking for both SSDs and HDDs, preferably new and from real brands.

>>110087327
Which agent do you recommend for xianyu??

Anyone got any cool lighters?

>>110103126
White+colorful buttons is best

>>110100280
Wowee.

>>110101772
the amazon basics ones used to be really good idk if they still are

https://www.amazon.com/dp/B00MIBN16O

>>110100280
das ist nice. now send it back like the others.

>>110094209
what's the esp32 and the screen for?

any good simple leather notebooks on ali? looking for one with those ribbon bookmarks

returns on ali are still good right? i returned a minipc 2 years back and it went pretty good with no hassles. wanting to return a keyboard

File: Clipboard01.png (1.05 MB, 1312x1500)

1.05 MB PNG

>>110110846

>>110101772
I haven't compared any brands, but I've been happy with these HUANUO ones for the past 3 years and they haven't exploded on me yet
https://www.amazon.com/dp/B07T5SY43L
https://www.amazon.com/dp/B07T3KCQ94
On a related note I recently got a couple of these arms for tablets and they seem decent
https://www.aliexpress.us/item/3256806780992082.html

>>110101888
>>110106183
>>110108466
thanks, is 25 eurobucks a good price for one?

>>110110846
sounds alright, especially for single monitor mounts
i have 0 idea for pricings on good dual ones

forsen

I got a chance to use a bit more the TS21 soldering iron I bought this summer. It just works. Ergonomically it's not great because I accidentally press the buttons. I don't have big hands. For an ogre with sausage fingers, I don't see it being a very good time. I thought the light was gimmicky. It's turned out to be useful.

File: Screenshot 2026-10-20 at (...).png (203 KB, 1234x762)

203 KB PNG

>>110119079 >>110121290

this piece of trash projector has gone up from $26 when i bought it to $45...
at this point i'd just buy one of those portable monitors for around the same price and it'll be at least 10" 2k reso

chink shit

File: Compliance4All.png (52 KB, 741x685)

52 KB PNG

>>110119577 >>110121782

>>110116859
At local german mall it's 75€. EU corpos are making bank on this new EU import tax rules.
<--- never forget

>>110119079
That's to protect against chinese who don't have anti-slavery laws like us.

>>110119577
ok boomer

File: 1786464665350581.png (6 KB, 473x125)

6 KB PNG

>>110120253 >>110122028

>Unforseen logistics issue.
add it to the list.

File: Screenshot 2026-10-21 at (...).png (17 KB, 1019x260)

17 KB PNG

>>110122028

>>110120061
actually hasn't moved since last week. owari da.

>>110116859
>this piece of trash projector
how can a $26 projector be trash?
surely it meets whatever low expectations you had?

>>110108124
my return went fine

>>110106796
>>110105945
i haven't tested it yet but it does say it. i won bros i won

>>110121290
my unit was DOA, and god i wish it was Dead Or Alive: Extreme lolis edition
but nope, dead on arrival

go the fuck away

>>110121290
i'm not a very fussy person because my standards are pretty low and i'm totally ok with using cheap things while keeping my keeping my expectations in check, but this projector falls short in every criteria you can think of and is just *barely* functional.
if i knew how gimped this thing is i really would've preferred to save that $26 and buy something else.

>>110119079
heard that if you register as a christian or something in some german municipals you'll have to pay a church tax. you guys love that shit huh.

File: aliexpress_order4.jpg (42 KB, 908x685)

42 KB JPG

>>110120061
>>110120253

fucking stuck in customs hell, no new updates for 7 days

>>110106796
nta, but can you elaborate?